Visit The Outboard Wizard’s website for genuine BRP OMC Evinrude parts at 10-50% off list prices.
mikeypmcg

1988 9.9 hp Johnson I need help what am i missing?  iam trying to remove the motor itself from the housing I have removed the 6 bolts visible from the outside, the 3 engine mounts inside the case, fuel line, shift linkage, choke, rich/lean adjuster and the darn thing wont budge! Am i missing an obvious connection or is the 20 year old gasket just fused together?  Ultimately i need to remove the tiller, which iam guessing the only way is to remove the motor.  please correct me if iam wrong.  Will the tiller slide out if the 4 phillips head screws where the tiller enters the lower unit are removed? I have removed 3 of them but stripped the fourth.

i
9.9 hp 1988 Johnson Long shaft
4 hp 1998 Evinrude
Quote 0 0
mikeypmcg

i just needed to pry harder the gasket had fused the 2 pcs together very hard.  It is done and completely fixed!

9.9 hp 1988 Johnson Long shaft
4 hp 1998 Evinrude
Quote 0 0