Visit The Outboard Wizard’s website for genuine BRP OMC Evinrude parts at 10-50% off list prices.

I get power to the trim motor but does not run....  I actuall stuck a volt meter probe into each wire (up and down) and got power when I pushed the switches.....  From what I've read, looks like a new trim motor..... 


I believe the relief valve is on the fluid resevoir ...... access through the starbord mounting bracket.....  I loosened the screw but can not get the center ram to retract even with the weight of the motor on it....


I think, after retracting the center ram I can tilt out the trim unit and get access to all three bolts on the trim motor....






Bill A.

Quote 0 0

Hello sounds like bad trim motor and will need to remove port engine mount bracket to access screws for trim motor.

Ralph, The Outboard Wizard
Owner, Lindenhurst Outboard Service Inc. since 1979 +
Websites: "Outboard-Wizard" a few domains since 2001 - 
Ebay Store: Outboard Wizard  The Outboard Wizard - Power Seller
You Tube: See me here!
Quote 0 0