Hello, I have replaced the water pump, thermostat, and the starboard(right-side) heads are still overheating and causing the overheat light to come...
Can anyone tell me if Evinrude part #'s 5031151, 5031725, or 5031738 will interchange with Suzuki part # 33920-99E14? Both are ECU's.
Bought a 1968 Larson Tri-hull with a evinrude 1967 100 Hp starflite. Motor would not start. Found pulse pack defective and replaced. Removed voltage...
hi i have lost the bolts that hold the top cowling in place does any body know the size please many thanks
I have been rebuilding a 15hp hammex outboard. They were sold from NSW in the 70's ,the company was Eska in America. I have been told there is...
Dear Sirs! I wonder if someone is able to tell me what articles I need to get a new 1996 binnacle remote control to match with my old motor? I...
Hi to everyone. Just joined this site and I hope someone can help.
I didn't see and introductory section,, but I live in Ireland, and have spent the...
Please help identify year and hp of a Johnson Sea Horse.
Mod. # SD20
Serial # 8311223
I recently acquired an old Johnson Sea Horse from the widow of a deceased friend. I have not been able to locate an ID plate, would appreciate help...
Need help identifying year model please.
Appears to be a 9.5? Johnson
model number 9822D
serial number E1722D
My engine runs great and has for a long time. Just recently while running full tilt the engine suddenly lost power and raced wildly (like it slipped...
I have an old 14' 1968 Larson All American I have totally restored. Last week on a test run it ran great. This week it does not. It will idle...
We have a 1976 Johnson 135hp (w/ 20" shaft) and need a replacement cowling as well as the cover piece just below the cowling.
Tried to replace the broken drive shaft pin for the impeller last night. Gear case was very difficult to remove, my manual was not much help. Removed...
I have a motor which seems to have a cracked ring on the bottom piston and has gotton stuck in one of the valve openings the pistons move smoothly...
I have a 15HP Viking outboard model 150 12V, serial # 21195. It appears to be an OMC product possibly dating back to the 1960's. What is the...
I have an old Evinrude 9.5 outboard.
The model number is 9822D
My local dealer (courtesy of their technical...
I've been looking on ebay etc for the parts to convert my 1975 stinger 75 to power trim tilt. I find several, but on closer inspection, none seem...
Supported videos include:
Please paste your code into the box below: