Simple Step-by-Step Instructions
Use the following procedure to...
I just re-powered my boat with twin Etec 150s, and ICON gauges. If anybody is familiar with the operation/set up of these, I'd be appreciative. My...
I have a 75 Hp E-tec and i-command gauges from 2009.
Last year I did the winterization with the i-command feature and it worked as described.
How do I add fluid for the tilt/trim system on the VRO Evinrude 115hp outboard ? Thanks in advance.
i have just noticed that i have gear lube dripping from behind the prop. took the prop off and there is lube in the bottom of the housing. i havent...
It’s time to winterize your outboard engine again! We have FREE written instructions to help you winterize your engine in 14...
Is there anything i need to do to the oil tank for my 1998 50 HP Johnson before winter? I read the winterizing instructions but saw nothing about the...
I have a 1990 200hp evenrude. It starts very hard and spits and sputters and sometimes dies at idle. The plugs are wet and washed out looking. It...
I have been winterizing by old XP-150 for years with no problems, i have anew etec 225 HO is there anything different I should be doing with this new...
With E10 Ethanol Blend Fuels now at all the gas pumps,
your fuel will be contaminated in the spring,
whether or not there's...
Supported videos include:
Please paste your code into the box below: